Previously I wrote about configuring a Microtik¬†for RDP. Well, that router died, so I’d to do it all over again. (Here are the¬†Terminal commands, except I’ve changed my public IP address to x.x.x.x.):-

/ip firewall nat>> add chain=dstnat action=dst-nat to-addresses= to-ports=3389 protocol=tcp dst-address=x.x.x.x dst-port=3389 log=no log-prefix=""
/ip firewall nat>> add chain=srcnat action=src-nat to-addresses= to-ports=3389 protocol=tcp dst-address= dst-port=3389 log=no log-prefix=""